HT600 series conference system is a professional conference microphone which can process, amplify and distribute sound. Built in single directional high fidelity capacitive sound head, so that sound recovery, high definition, small noise, with efficient whistle suppression function. The chairman unit has priority function keys, which can be used to close the representative units at work at any time, so as to control the order of the whole meeting room. In the host unit, there is a microphone to work at the same time limit function switch, you can choose "3" and "6" units, this function can also be used for "responder" game occasions. Each system host can connect 60 microphone units, which are connected by two hand handles; the expansion unit can hold up to 180 microphone units, suitable for any small and medium conferences and large international conferences.

Each system host can connect 60 microphone units and output in series

With simultaneous work microphone number limit switch, you can choose "3" or "6""

With audio parallel output and 6.3 jacks output interface

Audio output interface for conference process

Rated voltage: AC220V + 10% 50Hz

Frequency response: 20Hz-20KHz

Output impedance: REC:200 ohm

LINE:200 Omega

BALANCE:300 Omega

NOBALANCE:400 Omega

Signal to noise ratio: 78dB (1KHz THD1%)

Size: 485X220X50mm (19) international standard rack

Net weight: 3.2KG

Microphone ON/OFF uses long life, no noise touch switch

When the microphone is on, the red indicator is shining

The chairman shall give priority to the right to speak, and may at any time shut down all the representative units in attendance

Type: capacitive type

Directivity: single directivity

Frequency response: 60Hz-16000Hz

Sensitivity: -47 + 3dB @ 1KHz

Input voltage: 18V (main unit power supply)

Minimum output impedance: 1K ohms

Signal to noise ratio: 68dB (A)

Output socket: 8P terminal block

Data transmission line: 2.1m 8P shielded wire

Microphone net weight: 0.8KG

Accessories: windproof sponge